Samsung TV HDMI no signal troubleshooting technician providing live chat help

Steve H.

Reviewed for technical accuracy

Specialities: Samsung Smart TV troubleshooting, HDMI “No Signal” errors, One Connect box setups, HDMI-CEC (Anynet+), HDCP/handshake issues, PS5/Xbox/PC display problems, AV receiver & soundbar ARC/eARC

Samsung TV HDMI not working: “No Signal”, HDMI cable disconnected, device not detected, handshake/HDCP & source settings

Technician avatar Technician
Hey! We’ll get to the bottom of your Samsung TV “No Signal” on HDMI issue. This usually comes down to one of four things: wrong source/input, a bad HDMI port/cable, a device output problem (PS5/Xbox/PC/cable box), or an HDMI handshake / HDCP mismatch.

Quick questions so I can aim the steps correctly:
• What Samsung TV model/series (and year if you know), and is it a One Connect box model?
• Which device is connected (PS5, Xbox, PC, laptop, Apple TV, Roku, cable/satellite box, AVR)?
• What exactly appears: “No Signal”, “HDMI Cable Disconnected”, or a black screen with sound?
• Which HDMI port number are you using (HDMI 1/2/3/4, ARC/eARC)? Any switch/receiver in between?
Customer
It’s a Samsung Smart TV (4K). When I plug in my PS5 to HDMI 1, the TV says No Signal. If I switch sources it still won’t show. The PS5 is on (I can hear it). I tried two cables but same thing. Sometimes it flashes “HDMI cable disconnected”.
Technician avatar Technician
Thanks — that mix of “No Signal” + “HDMI cable disconnected” points to either (1) the TV isn’t seeing a stable HDMI link, or (2) the console is outputting a mode the TV rejects until the handshake completes.

Common causes of Samsung TV no signal on HDMI (and we’ll test them in a clean order):
• Wrong input / source settings: TV is on HDMI 1 but the console is actually on HDMI 2, or the TV didn’t lock onto the signal after standby.
• Loose port or cable fit: HDMI can “feel” inserted but not fully seated; some ports get slightly worn, especially if cables get tugged.
• HDMI handshake / HDCP issue: the TV and PS5 fail to agree on encryption (HDCP), resolution (4K vs 1080p), refresh rate (60/120 Hz), or HDR, so you see a black screen or “No Signal”.
• Intermediate device problems: AV receiver, HDMI switch, soundbar ARC/eARC path, or capture card can break the chain.

We’ll do a fast “known-good” chain first: TV ↔ cable ↔ PS5 directly, then tweak Samsung input options if needed.
Customer
The PS5 is plugged straight into the TV (no receiver). I’m definitely on the HDMI 1 source. Still shows No Signal on HDMI. Is there a quick way to tell if the HDMI port is dead vs a settings/handshake problem?
Technician avatar Technician
Yes — we can isolate this quickly with a structured “A/B” test.

Step 1 — Prove the HDMI port and the PS5 output
1) Move the PS5 to a different HDMI input (HDMI 2 or HDMI 3). Then select that exact source on the TV.
2) If you get a picture on another port, then HDMI 1 may be faulty or just picky with the cable. If none work, it’s likely handshake/settings or the PS5 video mode.
3) If you have any other HDMI device (laptop, streaming stick, cable box), plug it into the same port. If that also shows “No Signal”, that HDMI port is suspect.

Step 2 — Force a clean HDMI handshake (this fixes a surprising amount of “Samsung HDMI not working” cases)
• Power off the TV and PS5 completely (not standby). Unplug both from power for 60 seconds.
• While unplugged, disconnect the HDMI cable at both ends and re-seat it firmly (no tension on the connector).
• Plug power back in: TV first, then PS5. Now select the HDMI source again.

Tell me: do any ports show the PS5 at all, even briefly?
Customer
HDMI 2 works! HDMI 1 still gives No Signal. So the PS5 and cable are fine. But I’d like to use HDMI 1 because HDMI 3 is my soundbar (ARC). Could HDMI 1 be disabled or something?
Technician avatar Technician
Great isolation — that means your issue is port-specific (HDMI 1) rather than a global Samsung HDMI signal problem.

Step 3 — Check Samsung HDMI detection + run built-in HDMI troubleshooting
On many Samsung models you can run a quick self-check that tests HDMI detection:
• Go to Settings → Support → Device Care → Self Diagnosis and look for HDMI Troubleshooting (wording can vary by model).
• Run it for HDMI 1, then HDMI 2, and compare results. If HDMI 1 fails consistently, it points to a physical port issue or a dirty/loose connection.

Step 4 — “Refresh” the port (easy wins before we call it hardware)
• With TV off, unplug HDMI from HDMI 1, wait 15 seconds, reinsert firmly.
• Try a different cable again only on HDMI 1 (some ports are more sensitive to marginal cables).
• Make sure the connector isn’t being pulled sideways by a heavy cable — that can cause intermittent “HDMI cable disconnected”.

If HDMI 1 still refuses to lock while HDMI 2 is perfect, it may be a worn port — but there’s one more Samsung setting that sometimes helps with consoles/4K modes.
Customer
I found HDMI Troubleshooting and it says HDMI 1 has issues detecting the device. HDMI 2 is fine. Also, sometimes when I swap cables, HDMI 1 briefly shows the PS5 logo then goes black again. Sounds like a handshake problem on that port?
Technician avatar Technician
Exactly — that “shows for a second then black screen” is classic HDMI handshake / HDCP negotiation trouble, especially with 4K HDR or 120Hz modes.

Step 5 — Toggle Samsung Input Signal Plus (HDMI UHD Color) for the exact port
Samsung TVs have a per-port setting called Input Signal Plus (on some models it’s labeled HDMI UHD Color). It changes how the TV accepts high-bandwidth signals from consoles/PCs.
• Go to Settings → General → External Device Manager → Input Signal Plus.
• Find HDMI 1 and toggle it ON (or if it was ON, toggle OFF then ON to refresh).

Why this matters: if the PS5 is trying to output 4K HDR, the TV needs the port configured correctly; if the setting is mismatched, you can get No Signal on HDMI, flicker, or a black screen.

Step 6 — Force a simpler output temporarily (to confirm)
If you can access PS5 settings while connected to HDMI 2, set video output to a safer mode (1080p or 4K 60Hz without HDR) as a test. Then move back to HDMI 1 and see if it holds a stable picture.

Tell me what Input Signal Plus shows for HDMI 1 right now (On/Off).
Customer
Input Signal Plus was OFF for HDMI 1. I turned it ON, and now the PS5 picture comes on more often — but sometimes after switching apps it goes back to “No Signal”. Also my soundbar is on HDMI 3 (ARC). Could Anynet+ / HDMI-CEC be messing with source switching?
Technician avatar Technician
Yes — Anynet+ (HDMI-CEC) can absolutely cause weird HDMI behavior: auto input switching, devices waking each other up, or the TV “jumping” to ARC/eARC unexpectedly. It’s convenient when it works, but when the HDMI chain is unstable it can look like Samsung HDMI no signal even though the cable is fine.

Step 7 — Test with HDMI-CEC (Anynet+) temporarily OFF
• Go to Settings → Connection (or General) → External Device Manager → Anynet+ (HDMI-CEC) and switch it OFF for testing.
• Power cycle the TV and PS5 once more after disabling (CEC state can “stick”).

Then check two things:
1) When you select HDMI 1, does the TV stay on HDMI 1 (no bouncing to the soundbar/ARC input)?
2) Does the picture remain stable when you open/close PS5 apps or switch from game to home screen?

If stability improves, we can re-enable CEC later and narrow down which device is causing the HDMI control conflict (TV vs soundbar vs console).
Customer
Turning off Anynet+ helped — the TV stops switching inputs by itself. But I still get occasional flicker/blank screen on HDMI 1 when the PS5 changes resolution/HDR (like when starting a game). Is this an HDCP thing? Also I have an older HDMI cable in the wall.
Technician avatar Technician
That detail matters a lot. When a PS5 switches into HDR/4K or changes refresh rate, it pushes more bandwidth and the HDMI handshake (including HDCP) has to renegotiate. If the cable path is borderline (older cable, wall plate, coupler), HDMI 1 may fail first and show No Signal or brief black screens.

Step 8 — Rule out the “in-wall HDMI” and bandwidth limits
• For testing, connect the PS5 to HDMI 1 using a short, known-good high-speed cable directly (no wall plate, no adapter, no extension).
• If the flicker disappears, your in-wall cable or wall connector is the bottleneck. Older HDMI runs often struggle with 4K HDR, 120Hz, or even stable HDCP at higher bandwidth.

Step 9 — Stabilize the signal intentionally
If you must keep the older cable for now, set the PS5 to a more stable output (for example 4K 60Hz without forcing 120Hz, and consider disabling HDR as a test). This reduces bandwidth and makes the handshake more reliable.

Also: make sure the HDMI plug isn’t “hanging” in the port — even slight strain can cause the “HDMI cable disconnected” pop-up on sensitive ports.
Customer
With a short direct cable, HDMI 1 is much more stable. So it’s probably the wall cable or the connector. Before I replace it, should I update the Samsung TV firmware or do a reset? And what about the “Device Care” stuff?
Technician avatar Technician
You’ve already done the most important test — nice work. Yes, it’s still worth doing a few “maintenance” steps because Samsung updates sometimes improve HDMI compatibility and device detection (especially for consoles, soundbars, and ARC/eARC).

Step 10 — Firmware + soft reset (safe, quick)
• Check for Samsung TV software update (Settings → Support → Software Update).
• Do a soft reset: hold the power button on the remote until the TV restarts (or power off + unplug for 60 seconds).

Step 11 — Use Device Care / Self Diagnosis intelligently
• In Device Care, run the quick diagnostics and re-run HDMI Troubleshooting after updates. It won’t “fix” a bad cable, but it confirms whether the TV sees a stable HDMI link.

When to factory reset
A factory reset is a last resort if the TV is stuck in a weird input-control state, or if settings got corrupted — but since your direct-cable test proves the port can work, a reset likely isn’t necessary unless symptoms come back even with a good cable path.
Customer
Got it. After updating firmware, keeping Input Signal Plus ON for HDMI 1, and replacing the wall connector, the PS5 works and no more Samsung TV no signal on HDMI. Turning Anynet+ back ON didn’t break it either. Thanks — this was way clearer than random tips.
Technician avatar Technician
Perfect outcome — and your results match the “real world” cause we see most often: HDMI bandwidth/handshake instability from older cables, wall plates, or a finicky port configuration.

Summary (the reliable fix path for Samsung TV HDMI no signal):
• Confirm you’re on the correct HDMI source/input and test another port to isolate a bad HDMI port.
• Power cycle TV + device to reset the HDMI handshake / HDCP state.
• Toggle Input Signal Plus (HDMI UHD Color) for the specific HDMI port used by PS5/Xbox/PC.
• If ARC/eARC or auto switching is confusing things, test with Anynet+ (HDMI-CEC) OFF, then re-enable once stable.
• If problems happen during HDR/4K changes, suspect cable path quality (in-wall HDMI, adapters, wall connectors) and test with a short direct cable.

If you ever want, open the chat and tell me your exact Samsung model + device — I can map the best HDMI port (ARC/eARC, 4K/120) and the cleanest settings for your setup.

Quick answer: the accepted fix

Accepted fix for Samsung TV no signal on HDMI: verify you’re on the correct HDMI source/input, then isolate the problem by testing another HDMI port and another device. Power cycle TV + device to reset the HDMI handshake/HDCP, and enable Input Signal Plus (HDMI UHD Color) for the exact HDMI port used by your console/PC/box. If the signal drops only during HDR/4K changes, replace weak links like in-wall cables, wall plates, adapters, or low-quality HDMI leads. If inputs switch by themselves, test with Anynet+ (HDMI-CEC) temporarily OFF, then re-enable after stability returns.


Why Samsung TVs show “No Signal” on HDMI: source selection, ports, cables, handshake & HDCP

When your Samsung TV says “No Signal” on an HDMI input, it usually means the TV isn’t receiving a stable video signal from the connected device. Sometimes it’s as simple as choosing the wrong HDMI source or the external device being asleep. Other times it’s the HDMI chain: a loose connector, a failing HDMI port, a marginal cable (especially an older in-wall cable), or a wall plate/adapter that can’t handle higher bandwidth.

Modern devices (PS5, Xbox Series, PC GPU, 4K streaming boxes) constantly renegotiate video modes (resolution, HDR, refresh rate), which triggers the HDMI handshake and HDCP authentication. If the handshake fails mid-switch, you’ll see brief black screens, flicker, “HDMI cable disconnected”, or a persistent “No Signal” message. The goal is to simplify the chain, confirm port health, and then enable the correct Samsung input features for stable high-bandwidth HDMI.

How to test HDMI on a Samsung TV (PS5/Xbox/PC/cable box) — fast isolation checklist

Start by testing the same device on another HDMI port and testing another device on the “bad” port. This tells you immediately whether the problem is the TV input or the external device. Next, perform a full power reset (unplug TV + device for 60 seconds) to clear stuck HDMI/HDCP states, then re-seat the cable on both ends.

If the issue appears only at 4K HDR or when starting a game, toggle Input Signal Plus / HDMI UHD Color for that port and try a shorter high-speed cable directly into the TV (no wall plate, no coupler). If you’re using a soundbar on ARC/eARC or you notice auto switching, test with Anynet+ (HDMI-CEC) disabled to remove control conflicts. Once the picture is stable, re-enable features one at a time.

Samsung TV HDMI “No Signal” — quick troubleshooting tips

Most “HDMI not working” problems are the HDMI chain (port, cable, adapter) or handshake/HDCP during 4K/HDR switching.

Quick path: confirm correct source/input, test another HDMI port, then power cycle TV + device to reset the HDMI handshake. Enable Input Signal Plus (HDMI UHD Color) for the active HDMI port if you’re using PS5/Xbox/PC at 4K HDR. If you’re using ARC/eARC and the TV jumps inputs, temporarily disable Anynet+ (HDMI-CEC) while testing. If the signal becomes stable only with a short direct cable, replace weak links like in-wall HDMI runs, wall plates, or adapters.

Disclaimer: This information is AI-generated and intended for general guidance only. For advice specific to your TV model and connected devices, please consult a verified expert on Whizz-Tech before making changes.

Understand what these prompts mean


Getting Started Is Easy

Ask for help, 24/7

Members enjoy round-the-clock access to 12,000+ verified Experts, including Smart TV and HDMI troubleshooting.

Expert will respond in minutes

We match you with an Expert who specializes in Samsung TV HDMI “No Signal”, consoles, PCs, and ARC/eARC setups. Talk, text, or chat.

Save time & money

A short chat can resolve HDMI not working issues (settings, handshake, device detection) without expensive visits or returns.

FAQ

Why does my Samsung TV say “No Signal” on HDMI even when the device is on?

This usually happens when the TV is on the wrong source/input, the HDMI connection is unstable (loose port/cable), or the TV and device fail the HDMI handshake/HDCP — especially during 4K/HDR/refresh-rate changes. Testing another HDMI port and power cycling both devices helps isolate the cause quickly.

How do I fix Samsung TV HDMI not working with PS5/Xbox/PC?

Start by testing a different HDMI port and a different device to rule out a bad port. Then power cycle TV + console/PC to reset handshake state. Enable Input Signal Plus (HDMI UHD Color) for the specific HDMI port if you use 4K HDR. If you use a soundbar/receiver and inputs jump, test with Anynet+ (HDMI-CEC) temporarily OFF.

What is Input Signal Plus (HDMI UHD Color) and can it cause “No Signal”?

It’s a Samsung per-port setting that allows higher-bandwidth HDMI modes (common with consoles and 4K HDR). If it’s OFF when a device expects high-bandwidth features, you may see flicker, black screen, or No Signal. Toggling it ON for that HDMI port often stabilizes 4K/HDR detection.

Can Anynet+ (HDMI-CEC) cause HDMI no signal or input switching issues?

Yes. Anynet+ (HDMI-CEC) can trigger automatic input switching or device control conflicts with soundbars (ARC/eARC), receivers, or consoles. It usually doesn’t “break” HDMI, but it can make troubleshooting confusing. Turn it OFF while diagnosing, then re-enable after the signal is stable.

Sources

Matt Verified Icon
Matt ● replies in < 1 min
Technician Expert
⭐⭐⭐⭐⭐ Trusted by 27,000+ customers
Avatar
Alex · Expert's Assistant